Last week, India's retail inflation for October was reported at 6.09 percent, the first time in two years that it crossed the upper limit of the RBI's tolerance band. On November 16, the government released a second inflation number that many investors had not been watching, and it was twice as high. Wholesale price inflation, or WPI inflation, rose to 12.29 percent in October from 11.39 percent in September, the highest reading in the new WPI series that uses 2022-23 as its base year. Fuel and power inflation alone jumped to 32.84 percent. Two inflation numbers that differ so much look confusing, but the gap between them tells an equity investor something very useful about company margins. This article explains the difference between WPI and CPI, how to read the latest numbers, and why wholesale prices are often a better early guide to what is happening inside company profit and loss accounts.
The Consumer Price Index, or CPI, measures the prices that households pay at the retail level for a basket of goods and services, such as food, housing, transport, education and health. It includes services. The Wholesale Price Index, or WPI, measures price changes of goods at the wholesale or earlier stages of the supply chain, before they reach the consumer. It tracks three groups: primary articles, which include food articles, minerals and crude petroleum, fuel and power, and manufactured products. It does not include services. In simple terms, CPI shows what a family pays at the shop, and WPI shows what businesses pay for goods and raw materials and what producers charge at the factory gate.
| Feature | CPI | WPI |
|---|---|---|
| What it tracks | Retail prices paid by households | Wholesale and producer level prices of goods |
| Includes services | Yes | No |
| Main groups | Food, housing, transport, health, education and others | Primary articles, fuel and power, manufactured products |
| Published by | Ministry of Statistics and Programme Implementation | Ministry of Commerce and Industry |
| Used by the RBI for its target | Yes, the 4 percent target with a 2 to 6 percent band | No, but it is watched as a guide to cost pressure |
| Useful to equity investors for | The interest rate outlook and consumer demand | Input costs and company margins |
The WPI release also includes an Output Producer Price Index and a trial Input Producer Price Index, which are meant to track prices at the producer level more closely. The next set of data, for November 2026, is scheduled for release on December 14.
| Group | October 2026 | September 2026 |
|---|---|---|
| WPI, all commodities | 12.29 percent | 11.39 percent |
| Primary articles | 9.24 percent | 8.67 percent |
| Fuel and power | 32.84 percent | 25.85 percent |
| Manufactured products | 9.54 percent | 9.76 percent |
| Food index (about 25 percent of WPI) | 8.58 percent | 8.66 percent |
| CPI, for comparison | 6.09 percent | 5.54 percent |
Several points stand out. The WPI index rose to 113.3 from 112.5, and over the first seven months of the financial year, from April to October, WPI inflation averaged 10.14 percent. Fuel and power was the main driver, reflecting high crude oil prices, and it is the group where costs rose most. Manufactured products inflation eased slightly to 9.54 percent, but it remains high, which suggests that cost pressure has reached factory gate prices and is not limited to energy. The figures are provisional and are based on a weighted response rate of 81.1 percent, so they can be revised.
It also helps to see how quickly the picture has changed. In November 2025, a year earlier, WPI inflation was minus 0.32 percent, and fuel and power was in deflation of 2.27 percent. Part of the jump comes from this very low base, and an economist at India Ratings said that the October reading was the highest in the new series because of the base effect and a broad based increase in primary articles and fuel and power, as we explained in our article on retail inflation. The base effect describes how the same price rise looks bigger against a low comparison year.
A company makes money from the difference between what it charges for its product and what it pays for its inputs. WPI is closer to the input side, because it covers the raw materials, energy and intermediate goods that companies buy. CPI is closer to the selling side for consumer products. When wholesale prices rise much faster than retail prices, as they have now, with WPI at 12.29 percent against CPI at 6.09 percent, companies that sell to consumers face a squeeze, unless they can raise their own prices by the same amount.
A simple made up example shows how this works. Suppose a company buys inputs worth ₹70 to make a product that it sells for ₹100, so its gross margin is 30 percent. If input costs rise 12 percent, the cost becomes ₹78.40. If the company can raise its price only 6 percent, to ₹106, the gross profit becomes ₹27.60 and the gross margin falls to about 26 percent. If the company can pass on the full 12 percent and sells at ₹112, the gross profit is ₹33.60 and the margin stays at 30 percent. The difference between these two outcomes is pricing power, and it is the main reason why two companies facing the same input inflation can report very different margins.
Pass through is rarely instant. Companies often hold inventory bought at older, lower prices, which cushions the first few months. They sign contracts at fixed prices, they use hedges, and they hesitate to raise prices because they fear losing customers. As a result, the effect of a rise in wholesale prices tends to show up in margins with a delay of a quarter or two, which is why wholesale data can act as an early warning. A fall in gross margin in the coming quarterly results would not be a surprise given the movement of WPI over the last few months.
The pass through to retail is also partial. Retail fuel prices in India are heavily influenced by government policy, so a jump in the wholesale fuel index does not feed directly into the CPI. It reaches consumers through transport costs, electricity and the prices of goods that use a lot of energy. This is part of why analysts watch wholesale prices when they judge whether retail inflation could rise further.
| Group | Why it is exposed | What to check in the results |
|---|---|---|
| Energy intensive manufacturers, such as steel, cement, glass, ceramics, paper and chemicals | Fuel and power are a large part of their costs | Gross and EBITDA margin trend, energy cost as a share of sales |
| Makers that use crude derivatives, such as paints, tyres, plastics and packaging | Raw materials track crude oil prices | Gross margin, price increases taken, inventory |
| Airlines and transport companies | Fuel is a major cost | Fuel cost per unit, yields |
| Food and consumer goods companies | Edible oil, grains, packaging and freight | Price hikes against volume growth, rural demand |
| Price hikes against volume growth, rural demand | Metals and energy | Commodity pass through, order book pricing |
| Producers of oil, gas and some commodities | They receive the higher price | Realisations, volumes, tax and subsidy effects |
This table shows possible exposure and is not a forecast. The effect on any company depends on its own contracts, its inventory, its hedges and its ability to raise prices.
When the results come, look at the gross margin and the EBITDA margin over several quarters, and compare them with the movement in wholesale prices. Read the management commentary and the concall for comments on input cost inflation, on the price increases that the company has taken and on how much of the cost it has been able to pass on. Check the inventory, since a company with a lot of low cost inventory may see a margin hit in later quarters. Check how much of the cost base is energy or crude linked. Look at whether the company's volumes fell after it raised prices, since a price rise that cuts volumes may not protect profit. Compare companies in the same sector, because a company that holds its margin while its peers lose theirs is showing real pricing power, a point that connects with our article on margin expansion. Finally, read the guidance. If management expects costs to stay high and speaks of further price increases, the margin risk is not over.
First, treat WPI as a cost signal and CPI as a demand and interest rate signal. A high WPI tells you that input costs are rising, while a high CPI tells you that households are paying more and that the RBI may act. Second, look at the group data and not only the headline. The fall in manufactured products inflation from 9.76 to 9.54 percent is a small sign that factory gate pressure is not worsening, while the jump in fuel and power shows where the pressure sits. Third, watch the gap between the WPI and the CPI. A wide gap with WPI above CPI usually means that companies have not yet passed on all of their costs, which can mean either margin pressure now or further retail price increases later. Fourth, follow the crude oil price and the rupee, because the fuel and power group moves with them. Fifth, remember that WPI covers goods only, so it says little about companies that sell services, and for them the relevant costs are wages and the exchange rate.
Retail inflation tells you what households pay, and wholesale inflation tells you what businesses pay. With WPI inflation at 12.29 percent in October, led by a 32.84 percent rise in fuel and power, and CPI at 6.09 percent, the gap suggests that many companies are absorbing costs that they have not yet fully passed on. This is why wholesale data is useful to an equity investor. It points to the pressure on gross margins before it fully appears in the results, and it shows which sectors are exposed. The way to use it is to follow the groups behind the headline, to compare the gap with CPI, and to check each company for its inventory, its hedging, its pricing power and its record of protecting margins, before deciding how much of the cost pressure is already in the share price.